Services Available
RT - Industrial Radiograph Gamma and X-ray
Mobile x-ray trucks are available for on-site radiography both day and night shifts. We also have multiple radiography testing locations available at our laboratory facilities.
Iridium-192 Gamma Radiography
Radiographic Examination of various materials and thicknesses both on-site and in our laboratory facilities.
Cobalt-60 Gamma Radiography
Radiographic Examination of various materials and thicknesses both on-site and in our laboratory facilities.
X-Ray Radiography
Radiographic Examination of various materials and thicknesses both on-site and in our laboratory facilities.
UT - Ultrasonic Examinations
Multiple techniques of ultrasonic testing available
Phased Array
Phased Array Testing, L-Scans, S-Scans, B-Scans and interpretation available both on-site and in our laboratory facilities.
Shear Wave
Angle Beam Examinations of Welds, forgings, plate, and much more both on-site and in our laboratory facilities.
Pulse-Echo Longitudinal Scans
This Straight Beam Technique is for a pulse-echo examination of rolled carbon and alloy steel plate detecting internal parallel discontinuities.
Ultrasonic Thickness Testing
Thickness checking Ideally suited for maintenace checking of structural thickness changes due to corrosion or weathering.
PMI - Positive Material Identification
PMI is specifically designed for rapid, non-destructive, on-site verification of the type and elemental composition of many important engineering alloys.
X-Ray Fluorescence (XRF)
PMI Testing with X-Ray Fluorescence is available both on-site and in our laboratory facilities.
Laser Induced Breakdown Spectroscopy (LIBS)
PMI Testing with LIBS and XRF combined to include lighter elements such as C, P, S, and Si are available both on-site and in our laboratory facilities.
OES - Optimal Emissions Spectroscopy
OES Testing allows for low level detections of elements using spark and arc ignition and is available both on-site and in our laboratory facilities
MT - Magnetic Particle Examinations
In our laboratory we utilize a stationary wet bench for wet fluorescence magnetic particle testing and for on-site magnetic particle testing we use a portable handheld electromagnetic yoke both which can use A/C or D/C Current for surface and near surface indications.
Stationary Wet Bench Testing - Wet Fluorescence
Magnetic particle testing with our stationary wet bench technique is available in our laboratory facilities.
Portable Electromagnetic Yoke - Dry Powder
Dry Magnetic particle testing is available both on-site and in our laboratory facilities.
Portable Electromagnetic Yoke - Wet Fluorescence
Wet Fluorescent Magnetic Particle testing is available both on-site and in our laboratory facilities.
PT - Liquid Day Penetrant Testing
Liquid Dye Penetrant uses color contrast or fluorescent techniques which are both water washable and solvent removable
Liquid Dye Penetrant - Color Contrast
Color Contrast Liquid Dye penetrant testing is water washable or solvent removable and is available both on-site and in our laboratory facilities.
Liquid Dye Penetrant - Fluorescence
Fluorescent Liquid Dye Penetrant testing is available both on-site and in our laboratory facilities.
HT - Hardness Testing
Hardness Testing with Ultrasonic Contact Impedance (UCI) method, Rebound method, and Telebrineller hardness methods.
Mic 20 UCI and Rebound Hardness Tester
Mic 20 is a micro hardness test utilizing both the UCI method and the rebound method. This testing method is available on-site and in our laboratory facilities.
Mic 10 UCI Method
Mic 10 is a micro hardness test utilizing the UCI method. This testing method is available on-site and in our laboratory facilities.
Telebrineller
The Telebrineller is field-portable equipment specifically designed for on-site testing. Final
hardness value is determined as Brinell Hardness Number Comparison Method (BHC/test bar hardness value).
LT - Leak Testing
Helium Leak Testing down to 1 x 10^-4 and Bubble Leak Test - Direct Pressure Technique
Helium Leak testing
Our Ion Science Gas Check G2 leak detector is capable of detecting 1 x 10^-4 std cm^3/sec of a 100% helium by volume and this method is available on-site and in our laboratory facilities.
.jpg/:/cr=t:0%25,l:0%25,w:100%25,h:100%25/rs=w:360,h:270,cg:true)
Bubble Leak Testing
Bubble Leak Test- Direct Pressure Technique is available on-site and in our laboratory facilities.
FeT - Ferrite Testing
Ferrite testing is a way to measure delta ferrite content in austenitic and duplex stainless steels.
Ferrite Testing
The feritscope is a field-portable instrument specifically designed for rapid, non-destructive, on-site verification of the ferrite content in austenitic and duplex steel and is available on-site and in our laboratory facilities.
VT - Visual Inspection (Direct Visual Examination)
Direct Visual Examinations can be preformed on welds, castings, and on wrought and forged Components.
Visual Inspection
Visual Inspection (direct visual examination) technique is available on-site and in our laboratory facilities.
Contact us today if you have any questions or specific testing needs not listed above and we will be happy to work on accommodating your needs!
About Us
Leader in Non-Destructive Testing and Customer Excellence since 1972.
Globe X-Ray Services has been in business since 1972 and are proud of the relationships they hold with their customers. Globe X-Ray cares about the needs of their customers and brings the best quality with highly trained technicians.